What are the usage methods and steps of a hedge machine? What are the precautions for using a hedge machine?
Hedge trimmers, also known as hedge trimmers or tea tree trimmers, are commonly used to trim tea trees, green belts, etc. They are professional pruning tools in landscaping and greening. They generally rely on small gasoline engines to drive the blades to cut and rotate. Therefore, it is important to pay attention to the correct usage method when using them. So how do you use the hedge machine?
1. Turn off and cool the engine, mix unleaded gasoline (two-stroke machine) and engine oil in a ratio of 25:1 by volume, and inject the oil into the fuel tank.
2. Turn the circuit switch to the "ON" position, close the throttle lever, and press the carburetor pump ball until there is fuel flow in the return pipe (transparent).
3. Pull up the moving rope 3 to 5 times, start the hedge machine, move the throttle lever to the half open position, let the engine idle for 3 to 5 minutes, and then move the throttle lever to the "ON" position, and the engine will operate normally at the rated speed.
4. When using a hedge trimmer to trim a hedge, it should be kept smooth and tidy, with a consistent height and a downward slope of about 5-10 ° for trimming, which is more labor-saving, lightweight, and can improve the quality of trimming.
5. When operating, the operator's body should be on the side of the carburetor, and it is not allowed to be on the end of the exhaust pipe to avoid being burned by exhaust gas. Adjust and control the throttle according to work needs to avoid excessive speed.
6. After trimming, stop the machine, close the throttle, and clean the outer shell.
The above is the specific usage method of the hedge machine. In addition, as the hedge machine is equipped with high-speed reciprocating cutting knives, if operated incorrectly, it can pose danger to the human body. Therefore, it is necessary to pay attention to some operating precautions and safe operation.
What are the precautions for using a hedge machine
1. The purpose of the hedge machine is to trim hedges and shrubs. To avoid accidents, please do not use it for other purposes.
2. There are certain risks when using a hedge machine. Do not use a hedge machine after fatigue, physical discomfort, taking cold medicine, or drinking alcohol.
3. The exhaust gas from the engine of the hedge machine contains carbon monoxide, so it should be avoided to use it in poorly ventilated areas such as indoors, greenhouses, or tunnels.
4. The fuel used for the engine of the hedge machine is gasoline, which is flammable. Please do not refuel or store fuel in a location that can ignite a fire.
5. Do not use the hedge machine when the feet are slippery and it is difficult to maintain a stable working posture, when it is difficult to confirm the safety around the work site, or when the weather conditions are bad.
6. The continuous operation time of the hedge machine should not exceed 40 minutes, and the interval should be at least 15 minutes of rest. The daily operation time should be limited to four hours.
7. Operators should use the product according to the instructions and pay attention to wearing certain protective equipment.
8. Pruning the branches of the hedge strip
神手微信公眾號(hào)
